Specs & quotes / Own range
Private label SPC flooring: MOQ, trial orders and cartons
What sets the minimum on a private-label SPC order, minimums two factories state (dated), and the carton artwork to sign off.
Short answer
The MOQ on a private-label SPC order is set less by the factory’s line than by what has to be made new for you: a decor film print run, an embossing plate, printed cartons, licence labels. Library decors in your own carton start lowest; a new design raises the minimum per decor. Ask for the minimum per decor, per item, in writing.
Of the profiles in our Vietnam and Thailand directories, two record a minimum stated by the factory itself, ATT and Elefloor; the rest state none.
Unilin says its L2C label is mandatory on every box of flooring using one of its patents, so the carton artwork needs a place for it.
Under 19 CFR 134.11 a US-bound article must show the English name of its country of origin; whether the carton alone can carry it depends on the exceptions in 134.32.
A factory that quotes “MOQ one container” has told you its floor, not yours. The minimum that applies to your range depends on whether your decors already exist as film and plates, and on how much of the carton is printed for you. This guide works through those drivers in the order a buyer meets them, from the first quote to the carton proof.
What sets the MOQ on a private-label SPC order?
Each item that has to be made new for you carries its own minimum, and the highest one wins. A decor film print run, an embossing plate, a carton print run, a colour change on the line: each has a set-up the factory wants to spread over enough square metres.
The table sets out the drivers we see in private-label quotes, why each one creates a minimum, and the question that turns a vague MOQ into one you can plan around. It is our method; no standard sets these.
| Driver | Why it creates a minimum | What to ask the factory |
|---|---|---|
| Decor film | A new design or colourway needs its own print run at the film printer, with the printer’s own minimum | Is this decor in stock as film, or printed for my order? Minimum per decor? |
| Embossing | Embossed in register needs a press plate matched to the film; a plate made for you is a set-up of its own | Library plate or new plate? Who owns the plate? |
| Thickness, wear layer, backing | A non-standard build means a line changeover and its first-off scrap | Which builds run weekly, and which need a changeover? |
| Board size and click profile | A new size or joint needs tooling and a profile check | Is the size on the line now? Which licence covers this joint? |
| Carton print | Printed cartons are ordered from a box maker in runs; your artwork means your run | Plain carton with your label, or printed carton? Box maker’s minimum? |
| Licence labels | Where a licensor’s programme applies, each box needs its label | Which licensor, which label colour, who applies it? |
| Underlay and accessories | An attached pad or matching trims are bought in by the factory | Pad in stock in this thickness and colour? |
Ask for the minimum per decor and per item, and ask which driver sets it. A factory that names the driver can usually tell you how to lower it, for example by moving one decor to a library film or one carton design to a printed label.
What minimums do factories in our directory state?
Treat any published minimum as a starting point for the quote. The two we record are statements made by each factory on its own pages, captured at our review date, and neither is a quotation. They show the structure of a minimum more clearly than its size.
The figures come from the factories’ own statements, with the date each was reviewed. Read the scope column before comparing the two: one covers a Vietnam manufacturer, the other is a company-wide statement not confirmed for Thai orders.
| Factory (profile) | Minimum stated by the factory | Scope | Source date / our review |
|---|---|---|---|
| ATT, Vietnam | Generally one full container (standard MOQ) | Factory statement; quantity per decor, finishes and packing quote-specific | Factory article 3 Sep 2026 / reviewed Oct 2026 |
| Elefloor (Thailand directory profile) | 500 m² per library SKU per order; 3,000 m² per custom SKU, first order; 1,500 m² per custom SKU, reorder | Company-wide; not confirmed as Thai terms; no Thai quote held | Page undated / reviewed 31 Oct 2026 |
ATT’s figure appears on its Vietnam factory profile, where we note that decor allocation and payment still need a quote.
Elefloor’s three tiers, shown on its Thailand factory page, are the clearest public example of how a minimum moves: lowest for a library decor, highest for the first run of a custom one, lower again on reorder. Elefloor’s OEM page ties the lower reorder figure to a locked specification and film already in stock, which matches the drivers in the first table. The same page shows other minimums elsewhere for standard and custom orders, so the tiers above are not a quotation for any order.
Library decor or your own decor film?
Start from the factory’s film library unless the decor is the reason your range exists. A library decor carries no print run of its own, so the minimum falls back to the carton and the build. A new colourway or a new design brings the film printer’s minimum, a new embossing plate if you want register, and weeks of strike-offs.
There are four routes. The first three each add a set-up to the one before; the fourth is another way to print a new design:
- Library decor, library emboss: the film and plate exist; you choose and approve.
- Library design in a new colourway: the printer re-runs an existing design with your colour standard; new strike-offs, same plate.
- New design printed by gravure: engraved cylinders and a print run; Interprint, a decor-paper printer, runs its own cylinder engraving department.
- New design printed digitally: no cylinders; Interprint says its digital system for décor papers makes newly developed decors cost-effective in small quantities. Ask your film printer whether it offers a digital route.
Embossing is the step buyers tend to plan last. Elefloor’s own page says embossed in register needs matched decor film, and Interprint describes developing decors together with press plate manufacturers. A new design in register is a film and a plate developed as a pair; a library texture that is not in register avoids the second job, at the cost of the match between print and surface. Matching a decor from a customer’s photo is its own process, covered in taking a decor from a photo to a film reference.
How should a trial order be structured?
A trial has two jobs: to prove the factory can repeat the approved sample in volume, and to test whether your market buys the range. Keep it inside the factory’s existing set-ups so the minimum stays low, and leave custom decors for the second order, once the first has passed and sold.
Practical rules we use when planning a first private-label order:
- Use library decors and library plates; change the carton or label, not the film.
- Ask whether the factory will combine several decors into one full container, each at its own minimum, rather than one decor filling it.
- Compare a part container with a full one on landed cost per square metre, not on the order total. The container calculator shows how many cartons of your build fit before you ask.
- Agree in the PO that the reorder uses the same film batch where possible, or new strike-offs approved against your retained board.
A trial passes when the production boards match the master you approved. That approval only holds if the specification behind it is written down; turning an approved sample into a repeatable specification covers what goes into it.
What should you sign off on the carton artwork?
Sign off a printed proof, not a screen file, and sign off the content as well as the look. A carton carries legal marks for your market and the licensor’s label where one applies, next to the codes your warehouse scans and the decor code your customer orders by. An error on any of them is printed on every box of the run.
For the US, 19 CFR 134.11 requires the English name of the country of origin on the article, and on the container of an article that is excepted from marking. Section 134.32(d) excepts articles where marking the container will reasonably indicate the origin, so whether a carton alone is enough for your boards is a point to settle with your broker before the artwork is final. Section 134.41 adds that the final purchaser in the US must be able to find the marking easily and read it without strain. The click licence is the other mark to check. Unilin treats products without its L2C label as unlicensed, even if a licensee made them. Välinge’s labels are colour-coded by the region where the goods may be sold. Both points are explained in what an importer should check on click licences.
The checklist below is what we would sign off on the proof, item by item, with the reason each one matters.
| Item on the carton | What to check on the proof | Why it matters |
|---|---|---|
| Country of origin | Country name in English, for example “Made in Vietnam”, legible, on the outer carton | US marking under 19 CFR 134; other markets have their own rules |
| Brand, product and decor name | Spelling, decor code matching the PO and the approved sample | A wrong decor code sends the wrong boards to a customer |
| Contents | Boards per carton, m² per carton, board size and thickness | Must match the packing list and the specification |
| Batch or production code | A field the factory fills per run, not a fixed print | Lets you trace a claim to a run |
| Licence label | Space for the licensor’s label, right colour for the market | Unlabelled boxes are treated as unlicensed by the licensors |
| Barcodes | Code type, number, quiet zone; scan a printed proof | A barcode that fails at the warehouse stops the delivery |
| Market marks and warnings | Only marks the product holds for that market, with its own documents | A mark without the test file behind it is a liability for the brand owner |
| Carton build | Board grade, print colour against a colour standard, edge protection | A weak carton fails at loading or in the warehouse, not at proof stage |
Keep the signed proof with the PO. If the factory reprints the cartons for a reorder, ask for a new proof; the box maker or its print plates may have changed since.
Who owns the decor, the plates and the artwork?
Agree it before the first order. Without a clause, the film printed for your decor, the emboss plate and sometimes the artwork files sit with the factory, and your design can reappear in someone else’s range. Ownership also decides whether you can move the decor to a second factory later.
Elefloor’s OEM page states that packaging artwork files are the buyer’s to keep. Put four things in the PO: who owns the print file and the cylinders or plates, whether the factory may sell the decor to others and for how long, what happens to leftover film, and who holds the artwork source files. If the factory buys the film from a printer, ask whether the printer will release the design to another factory on your instruction. The answer decides how locked in you are.
How would a first private-label order work? A worked example
Illustrative figures only, not market data or any factory’s terms. A distributor wants an own-brand SPC range of six decors. Two of them are new designs developed for its market; four are close to decors in the factory’s library.
The factory quotes one MOQ per order. The buyer asks for the minimum per decor and per item. The answer: library decors carry a modest minimum each, the two new designs a much higher one each because of the film print run, and printed cartons a box-maker run per design.
The buyer splits the range. The first order is the four library decors in one 20ft container, packed in plain cartons with a printed label carrying its brand, origin marking, decor code and a space for the licence label. The two new designs go into development in parallel: strike-off boards first, then a press plate once the film is approved.
The trial passes inspection against the master boards. Three of the four decors sell through; one does not. The second order moves to printed cartons for the three that sold and adds the two new designs, now with approved film and plates. The decor that did not sell is dropped, and no custom film was printed for it.
Our view
We would build a private-label range in two steps: prove the factory and the market on library decors with your own label, then pay for custom film and printed cartons on the decors that sold.
We would also write ownership and reorder terms into the first PO, while you still have the choice of factory. If you want a partner on the development side, our product development support covers it.
For the pieces around this one, quotes, specifications and decor films, see the other specs and quotes guides.
Common mistakes on private-label SPC orders
Most expensive surprises on a first own-brand order come from treating MOQ as one number and the carton as an afterthought. The table lists the ones we check for.
| Mistake | What it costs | How to avoid it |
|---|---|---|
| Accepting “one container” as the MOQ | Each new decor may carry its own film minimum on top | Ask the minimum per decor and per item, and the driver behind each |
| Developing new designs for the trial | Film and plate set-ups paid before the market has answered | Trial on library decors; develop custom decors in parallel |
| Approving the carton on screen | Colour, barcode, decor code and origin errors printed on every box | Sign a printed proof; scan the barcode from it |
| No space for the licence label | Boxes leave without the label the licensor requires | Put the label position on the artwork; check the colour for the market |
| No ownership clause | Your decor sold to another buyer; no way to move factory | PO clause on print file, plates, exclusivity and leftover film |
| Reordering without new strike-offs | Colour or emboss drift between batches | Approve strike-offs against your retained master board |
Questions buyers ask
Can I split one MOQ across several decors?
Sometimes, if every decor is already in the factory’s film stock and only the carton is yours. Once a decor needs its own print run, the film printer’s minimum applies to that decor alone, and splitting stops working. Ask for the minimum per decor, not per order.
Can I ask the factory to keep my film and plates for the next order?
Yes, and you should agree it in writing: how much film is held, for how long, in what storage conditions, and who may use the plate or the print file. Without that clause, leftover film is the factory’s stock and may end up in another buyer’s range.
What happens if the factory changes film supplier between orders?
The decor may look the same on screen and differ on the floor, in colour or gloss or in how the emboss sits on the print. Treat a film supplier change as a specification change. Ask for new strike-off boards and compare them with your retained master board before the reorder runs.
Can I use the factory’s own brand on the trial and switch to mine later?
You can, and it lowers the trial minimum, but the trial then tells you nothing about your carton print, your labels or how your brand reads on the shelf. A plain carton with your own printed label is the middle way: it tests the packing and the label without a carton print run.
Do I need my own click licence to sell a private-label floor?
The licence sits with the factory that mills the joint. What you need is evidence that the factory holds the right licence for your market and that every carton leaves with the licensor’s label where the programme requires one.
Sources & further reading
- eCFR via Cornell LII: 19 CFR Part 134, country of origin marking, sections 134.11, 134.32 and 134.41 (read November 2026)
- Unilin Technologies: L2C label program (read November 2026)
- Välinge: L2C label program (read November 2026)
- Interprint: services, cylinder engraving and digital decor paper printing (read November 2026)
Authorship, affiliations & disclosure
Prepared from the regulation, licensor and decor-printer sources listed, read on 11 November 2026, and from factory documents (Vietnam reviewed October 2026, Thailand reviewed 31 October 2026), including the ATT and Elefloor factory pages. Minimums quoted are factory statements, not offers; Elefloor’s page also shows other minimums for standard and custom orders, so confirm current terms in a dated quotation. Interprint’s statements concern décor papers; an SPC film printer’s own terms are not represented. The worked example is illustrative. No factory visit or test is represented.
Corrections & editorial informationContinue exploring.
All guides in Specs & quotesSPC flooring and sun exposure: gaps, glazing and fade evidence
SPC flooring in direct sunlight: one maker doubles its 5 mm gap to 10 mm where sun comes through glass doors. What to ask for before you approve a decor.
Read the guideSPC flooring gloss level: how to specify a matt finish that repeats
Name the geometry, target and tolerance: ISO 2813 reads gloss at 20°, 60° or 85°, and its scope covers non-textured coatings only.
Read the guideAcoustic SPC flooring: how to specify and verify the sound rating
Acoustic SPC flooring claims rest on one lab build-up: ASTM E2179 rates the covering on a concrete slab, not your building. What to ask for.
Read the guide